02/2020 | The BPS 300i is the second generation of bar code positioning and sets standards both in performance characteristics and in handling.
02/2020 | Data transmission photoelectric sensor with 100 MBit/s real-time transmission.
02/2020 | The Ezi-ServoII EtherCAT ALL is an integrated stepping drive, which can be combined with major EtherCAT master controllers.
02/2020 | Ezi-SERVOII EtherCAT 4x is a 4-axes Closed Loop Stepping System, which can be combined with major EtherCAT master controllers.
02/2020 | THe Ezi-IO EtherCAT is a digital I/O module supporting EtherCAT.
02/2020 | Maximum measurement data rates from 10 kHz up to 1 MHz per channel for slow or very fast mobile measurements of analog voltages: With measurement range from ±10 mV to ±20 V.
02/2020 | EtherCAT network simulation software for virtual commissioning with digital twin and for EtherCAT master controller release tests.
02/2020 | With the TC3 EtherCAT Simulation (TE1111) function and a network adapter the simulation computer can simulate a number of EtherCAT slaves.
01/2020 | The AX58200 is a 2/3‐port EtherCAT Slave Controller SoC equipped with ARM® Cortex®‐M4F core with DSP extension runs up to 192 MHz and EtherCAT Slave Controller (ESC) with two integrated Fast Ethernet PHYs.
01/2020 | The AX58200 ADIO Demo Kit includes AX58200 Evaluation Board and AX58200 Analog/Digital I/O Expansion Board. ASIX also
provides a free Board Support Package (BSP) for designers to evaluate the AX58200 ADIO Demo Kit functionalities quickly.
01/2020 | The EX58200 EtherCAT SoC Evaluation Board is an easy-design and flexible development board for designers to evaluate AX58200 EtherCAT functionalities on different industrial automation applications.
12/2019 | KV-XH16EC includes high-speed processor only for motion control, which enables to lead to the best specification in its class. Thanks to user-friendly software, even the complicated control can be realized more easily.
12/2019 | Non-contact linear position sensor. Absolute detection, multi magnet capable.
12/2019 | The OCP2101 allows to connect actors and sensors as FSoE slave into a Safety over EtherAT system to provide safety functions according to EN 61800-5-2.
12/2019 | The FS-PLC03A00S00 allows to connect actors and sensors as FSoE-Master in a Safety over EtherCAT system to provide safety funcations according to EN 61800-5-2.