LMP 46 ETC

TR-Electronic has redesigned signal processing for linear-absolute position detection and thus clearly improved measured value quality for critical applications in particular. For measurement lengths up to 1000 mm linearity is improved to 0.05 mm, which opens up new fields of application.

The measurement acquisition electronics is available for all TR interfaces. There is no change in the programming of the devices, so that changing to the newest generation presents no problem.

The LMP46 offers a profiled aluminium housing for machine mounting. Grooves on three sides enable a wide variety of mounting types with clamping shoes or sliding blocks. The magnets are guided on the profile and are moved via push rods with a ball joint. Unguided magnets are also optionally available, if the machine's mechanical components observe the necessary tolerances. The LMPI46 operates completely free from wear with this technique. A number of systems available on the market can be replaced by the LMP46. Suitable spacers are available for this purpose. TR will support the user in the selection of components for a specific case. The profile shape is also excellently suited for multiple-magnet scanning.

With 3 magnets a resolution of 1μm is achieved, while with up to 30 magnets the resolution is 50 μm. The positions of all magnets are then output via the bus; one measuring system replaces several individual measuring systems. The LMP46 linear-absolute position measuring system is produced for measurement lengths up to 4 m.

 

 

 

LMP 46 ETC

Azienda

TR-Electronic

TR-Electronic GmbH

Conformance tested

Prodotti certificati