The drive system 325V DC consists of power supply and drive module with EtherCAT and is available in further performance classes.
The power supply with active PFC is connected to a three-phase 400 V mains supply and supplies several drive modules with the DC-bus voltage.
With the drive modules, the selection of safety function according to EN 61800-5-2 with Safety-over-EtherCAT is possible, and the drive module can be used as safety component according to Machinery Directive 2006/42/EC.

Power supply:  PSxx325A00S00
Mains supply:  3 x 400 V AC
Output voltage:  325 V DC
Dimensions Power supply (HxWxD):  295 mm x 80 mm x 185 mm
Drive modul:  ACxx325A00S00
Supported types of motors:  Synchronous motors (PMSM), asynchronous motors (ASM); connection of holding brake possible
Safety functions:  STO, SS1, SS2, SOS, SLS, SDI, SMS, SBC with SBT with Category 3, PL d
Supported position encoders:  Resolver, Hiperface, sine/cosine encoder, EnDat 2.2, BiSS, Hiperface DSL, SCS open link, Magnescale; with motor temperature monitoring
I/O-Interface:  6 digital 24V-Inputs, 1 digital output to connect holding brake (with SBC)
Fieldbus interface:  EtherCAT (CoE, FoE, Safety-over-EtherCAT)
Engineering interface:  USB-Interface, SD-Card
Dimensions Power supply (ACxx325A00S00) (HxWxD):  295 mm x 50 mm x 185 mm